Device Drivers for SPECTRA III, CELESTA, & AURA III light engines

The latest nightly builds of MicroManager 1.4.23 now include device drivers for SPECTRA III®, CELESTA® and AURA III® light engines. The basic set-up in the MicroManager Hardware Configuration Wizard is shown in the screenshot below.

Note that the GEN3 driver uses STANDARD mode communications. The light engine serial port addressed by MicroManager must therefore be set to STANDARD mode on the settings page of the Web GUI.

Other image acquisition software packages that now support SPECTRA III, CELESTA, and AURA III light engines are:

  • NIS Elements (Version 5.11 and above)
  • MetaMorph

For updates on controlling SPECTRA III, CELESTA, and AURA III light engines using other software packages, please email our Technical Support group at techsupport@lumencor.com.

Leave a Reply

*

lumencor

14940 NW Greenbrier Parkway | Beaverton, OR 97006 USA | 503.213.4269 | info@lumencor.com

Join Our Newsletter

  • This field is for validation purposes and should be left unchanged.